User Tools

Site Tools


equipment:brew_kettles

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
equipment:brew_kettles [2010/11/16 20:28] – Fixed links in kettle size section mrmekonequipment:brew_kettles [2017/09/11 12:10] (current) – external edit 127.0.0.1
Line 1: Line 1:
-//''This page contains information about selecting and using brew kettles.''//+====== Brew Kettles ======
  
-====== Kettle Selection ====== +This page contains information about selecting and using brew kettles.
-===== Metal Type ===== +
-See the [[equipment:metallurgy|metallurgy]] page.+
  
-===== Kettle Size =====+===== Kettle Selection ===== 
 +==== Metal Type ==== 
 +There are various advantages for choosing one metal over another.  The most common metals for kettles are stainless steel and aluminum.  
 + 
 +For metal comparison, see the [[equipment:metallurgy|metallurgy]] page. 
 + 
 +==== Kettle Size ====
 For [[techniques:extract_brewing|extract brewing]]: For [[techniques:extract_brewing|extract brewing]]:
   * For 5-gallon [[techniques:partial_boil|partial boils]], a 3 gallon kettle is tiny, 4 gallons is average, 5 gallons is best   * For 5-gallon [[techniques:partial_boil|partial boils]], a 3 gallon kettle is tiny, 4 gallons is average, 5 gallons is best
Line 12: Line 16:
 For [[techniques:brew_in_a_bag|Brew In A Bag (BIAB)]]: For [[techniques:brew_in_a_bag|Brew In A Bag (BIAB)]]:
   * For 5-gallon [[techniques:BIAB]], 15 gallon kettle is highly recommended   * For 5-gallon [[techniques:BIAB]], 15 gallon kettle is highly recommended
 +
 +===== Kettle Accessories =====
 +==== Valves ====
 +Available in weldless or welded versions, valves are often attached near the bottom of the kettle to allow easy transfer of wort after the boil.  A hole is drilled in the kettle and a ball valve is attached.  Welded valves are more durable and less prone to leaking, but weldless valves must be used on non-weldable metals such as aluminum.
 +
 +After boiling, tubing can be connected to the valve and run to a [[equipment:wort_chiller|wort chiller]] or directly to a fermenter.  This is often easier than starting a siphon, and the valve can additionally have a filter to prevent [[boil:trub]] from exiting the kettle.  
 +
 +Valves often have a [[equipment:diptube]] attached that extend lower than the opening in the kettle so drain wort that is lower than the height of the valve.  The diptube can be a solid piece of pipe, or a mesh braid to filter solids.  Mesh braids can be easily clogged by the fine particulate cause by [[ingredients:pellet_hops|pellet hops]], but are effective at filtering the sediment from [[ingredients:whole_leaf_hops|whole leaf hops]].
 +
 +The alternative to using a valve drain is simply siphoning from the top of the kettle, often assisted by a [[equipment:racking_cane|racking cane]].
 +
 +==== Thermometer ====
 +
 +
 +==== Sight Glass ====
 +
 +
 +
 +
  
  
equipment/brew_kettles.1289935733.txt.gz · Last modified: 2017/09/11 12:10 (external edit)